Ref: PMI-160

Measurement display unit - 1 to 12 channels

Custom-built unit made to order
1 to 12 analog inputs: force, torque, speed, angle, LVDT, inclination, displacement, weight, temperature
Connectors, display type, enclosure format, etc... configurable
The unit supplies power to the sensors
Sensor scaling, up to 21 points
Front or remote tare.
Optional: Relay outputs, analog outputs and RS-232/485 serial port or Ethernet
Dimensions: specific
Sensor connectors: your choice, e.g. SUBD, LEMO, M12, M8, etc...
Output connectors: SUBD, BNC, etc....
IP65 front panel
Power supply 24 VDC or 230 VAC, battery operation possible

2-4 weeks

Overview

PMI-160 instrumentation units are built to order, as a complement to measurement chains. The enclosure allows simultaneous display of 1 to 12 measurement signals. The unit is built according to the constraints of the application:

desktop enclosure
Panel for electrical cabinet
Portable battery-powered unit
19" rack etc...

Supported sensors

force sensors
torque sensors, with angle / speed output
Displacement sensors: potentiometric, LVDT, inductive
Angular and linear encoders
inclinometers
pressure sensors
thermocouples
PT100 and Pt1000

As standard, each instrumentation unit is delivered with a fused On-Off switch, 1 connector for the measurement input (SUBD, M8, M12, LEMO, SOURIAU, etc...). In addition to the display, a copy of the measurement signal (after conditioning) is available as an analog output (0-10V, 4-20mA) or digital output (RS 232/485 or Ethernet).