Stainless steel IP67 low-cost load pin 0-5 to 0-200kN

Overview

The ALP instrumented pin is installed in place of the original pin for load measurement/monitoring up to 20 tonnes, with a measurement accuracy of approximately 0.5 to 1% of full scale. The output signal is 1.0 mV/V excitation (5 or 10V). Overload protection is 150% of the measurement range.

Specifications

Installation

The pin is mounted in place of the standard pin in the clevis head and measures tensile and compressive forces applied to the cylinder surface. It is supplied with a 3 m cable and is suitable for outdoor use, with a stainless steel IP67 body and an operating temperature range of -20 to +70°C. The output signal (1.0 mV/V) can be amplified as an option.

Dimensions

Configuration options

• Dimensions

• Measurement ranges

• Connectivity

• Submersible version

• Conditioning, acquisition: Display, Conditioner or acquisition modules

Applications

• Machine tool instrumentation
• Marine
• Lifting
• Weighing

Dimensions

Connectivity

• Calibration in tension and/or compression
• Cable length
• Specific connector
• Extended temperature compensation
• ISO 17025 calibration
• Amplification (5VDC, 10VDC, 4-20mA)
• Submersible version
• TEDS

• Single-channel conditioner: GSV-6K (inline), GSV-1H (DIN rail), GSV-1M (IP67) or GSV-6L (miniature)

• Single-channel display: TRA-240 (basic) or GSV-2MSDI (with standalone logger function)

• Desktop conditioner/display GSV-2TSDI

• Four-channel conditioner GSV-1A4

• Single-channel: GSV-2AS (RS-232/485 or CANopen) or GSV-3USB (1 or 2 channels USB)

• Four-channel GSV-4USB (USB)

• Six-channel GSV-6BT (Bluetooth) or GSV-6LTE (LTE datalogger)

• Eight-channel GSV-8DS (LAN/WiFi/USB/EtherCAT/CANRS-232)